Camera Controller Node

Parameter	Explanation
Target camera	Specifies the target camera affected by the node. If no target is set, the currently active camera is used.
Execute	Executes the node.
↳ On Start	Executes the node when the game starts
Enabled	Enables or disables the node. Disabled nodes cannot be executed
Type	Set offset or Set. See below for descriptions
Camera Object	Outputs the currently active camera

Yaw offset	Shifts the camera's horizontal (left-right) rotation by the amount of degrees defined here. Example: If you add a yaw offset of 30°, the camera rotation will be shifted 30° to the right from its current horizontal rotation. A -30° offset would make it turn 30° to the left.
Pitch offset	Shifts the camera's vertical (up-down) rotation by the amount of degrees defined here. Example: If you add a pitch offset of 20°, the camera will tilt upward by 20° from its current vertical rotation. A -20° offset would tilt the camera downward by 20°.
Zoom multiplier	Zooms the active or target camera in or out

Angle offset (Yaw)	The value specified here will be used as the active or target camera's Angle offset (Yaw) parameter. Affects the horizontal rotation.
Angle offset (Pitch)	The value specified here will be used as the active camera's or target camera's Angle offset (Pitch) parameter. Affects the vertical rotation.
FOV	Sets the active or target camera's Field of View (FOV)
Orthogonal size	Determines how much of the scene is visible when the camera is set to be orthogonal (aka. does not use perspective distortion). A larger value captures more of the scene, while a smaller value zooms in.
Target	Changes the target camera object

¶ Parameters